VAKUR
English

Using an old phone as a baby monitor

Last updated: October 31, 2026

An old phone makes a good baby phone if it still runs a supported system, holds a charge while plugged in and has a working camera and microphone. You keep your everyday phone as the parent phone and give the old one a second job in the nursery.

Why an old phone works well

The baby phone does not move. It sits on a shelf, stays on the charger and runs one app all night. That is an easy job for a phone you no longer carry around. You do not need a SIM card in it if your home Wi-Fi is reliable, and it frees your everyday phone to stay with you.

It also means you can try a phone baby monitor before buying any extra hardware. If it suits your family, you already have a monitor; if not, the old phone goes back in the drawer.

Check the system version first

The most common reason an old phone does not work is the software. Apps need a reasonably recent system, and phones that no longer receive updates also stop receiving security fixes.

For Vakur, an old iPhone needs iOS 16.4 or later, and an old Android phone needs Android 7 or later. On an iPhone you will find the version under Settings, General, About; on Android, usually under Settings, About phone. If the phone can be updated, do that before you start.

A checklist for the old phone

Go through these points once, ideally in the afternoon rather than at bedtime.

Battery and charger

Older batteries lose capacity, and live video is demanding. Plan for the old phone to stay plugged in the whole time. Use a charger in good condition and a cable that is long enough to reach a stable spot without stretching.

If the phone gets noticeably warm, give it space: take it out of a thick case, do not place it on soft fabric and keep it away from heaters.

Setting up the old phone as the baby phone

Install Vakur on the old phone and on your everyday phone. Choose Baby on the old phone and Parent on the one you keep with you, then scan the QR code with the parent phone. That pairing only happens once; after that the two phones find each other by themselves.

Switch on Do Not Disturb on the old phone so calls do not interrupt the sound. Stand an Android phone upright, otherwise its picture arrives rotated. Leave Vakur open – the screen dims by itself.

Where to place it

Put the old phone a little away from the bed, on something stable, with the camera looking at the mattress. The phone and the cable must stay out of your baby’s reach and never go into the cot or crib. Look at the picture on the parent phone to check the angle before the first night.

When the old phone is the wrong choice

If the phone cannot be updated to a supported system, if it switches off even while charging, or if the microphone crackles, use another phone. A baby phone that cuts out without you noticing is worse than none, because you are relying on it.

That is also why Vakur sounds a loud alarm on the parent phone when the connection to the baby phone is lost, even with the screen locked. If the old phone switches itself off, the parent phone tells you.

Common questions

Can I use an old phone as a baby monitor?

Yes, if it runs a supported system and works reliably on the charger. With Vakur that means iOS 16.4 or later or Android 7 or later.

Does the old phone need a SIM card?

No. On your home Wi-Fi it works without a SIM card. Away from Wi-Fi it needs mobile data, which usually means a SIM card.

Can I use an old Android phone with an iPhone?

Yes. Vakur works with any combination of iPhone and Android, so an old Android phone can be the baby phone for your iPhone.

Try Vakur on your own phones

Two phones, iPhone or Android in any combination. The parent phone is always free, the baby phone is free for 48 hours, then one single purchase – no subscription.

App StoreGoogle Play

More guides