How to use your phone as a baby monitor
Yes, you can use your phone as a baby monitor. You need two phones – one stays in the room with your baby, the other stays with you – and a baby monitor app installed on both. Pair them once, plug in the baby phone, point the camera at the bed and keep the parent phone with you.
What you need
A phone baby monitor always works in pairs: a baby phone that watches and listens, and a parent phone that shows the picture and plays the sound. Many families already have everything they need, because an old phone is sitting in a drawer.
Both phones need a network connection, either Wi-Fi or mobile data. They do not have to be the same model, or even the same system. With Vakur, an iPhone with iOS 16.4 or later and an Android phone with Android 7 or later work in any combination: two iPhones, two Android phones, or one of each.
- Two phones that still receive app updates
- A charger and a cable long enough to reach a safe spot
- Wi-Fi or mobile data on both phones
- The same baby monitor app on both phones
How to set up your phone as a baby monitor
The setup takes a few minutes and you only do it once. Here is how it works with Vakur; most apps follow a similar pattern.
- Install Vakur on both phones and open it.
- Choose Baby on the phone that stays in the nursery and Parent on the phone you keep with you.
- Scan the QR code with the parent phone. From then on the two phones find each other by themselves.
- Plug the baby phone into its charger and place it so the camera sees the bed.
- Switch on Do Not Disturb on the baby phone so that calls do not interrupt the sound.
- Check the picture and sound on the parent phone before you leave the room.
Where to put the baby phone
Place the baby phone a little away from the bed, high enough that the camera looks down onto the mattress, and on something stable such as a shelf or a dresser. The phone and its cable belong well out of your baby’s reach – never in or on the cot or crib.
Stand an Android baby phone upright – on its side, the picture arrives rotated on the parent phone. Leave Vakur open on the baby phone; the screen dims by itself, so it does not light up the room.
Video or sound only
Seeing your baby is reassuring, but live video uses more battery and more data than sound. If you mostly want to hear when your baby wakes, a sound-only mode is enough. Vakur has a sound-only mode that saves battery, and you can switch back to the picture when you want to look in.
What a good phone baby monitor should do
The most important question is not picture quality but what happens when something goes wrong. A baby phone can lose its connection, run out of battery or drop off the Wi-Fi. A good app makes that visible instead of simply going quiet.
In Vakur, the parent phone sounds a loud alarm if the connection drops – even when the screen is locked. Vakur also warns you beforehand if the volume is set too low, and reconnects by itself; the alarm stops when the connection is back.
- A clear alarm when the connection is lost
- Works while the parent phone is locked
- Talk-back, so you can speak to your baby
- Noise alerts you can adjust
- No recordings stored anywhere
The parent phone at night
You can lock the parent phone and put it on your bedside table. Sound keeps playing and the alarm keeps working. The one thing to avoid is swiping Vakur away in the app switcher – leave it open in the background. There is also a night mode for the parent phone.
Know the limits
A phone baby monitor depends on power and on the network. Keep the baby phone charging, keep both phones online and test the setup once before the first night. Vakur is a helper for parents, not a medical device, and it does not replace supervision by an adult.
Common questions
Can you use two phones as a baby monitor?
Yes. That is exactly how a phone baby monitor works: one phone stays with your baby, the other with you. With Vakur any mix of iPhone and Android works.
Can I use my iPhone as a baby monitor?
Yes, as the baby phone or as the parent phone. Vakur needs iOS 16.4 or later, and the other phone can be an iPhone or an Android phone.
Can I use my phone as a baby monitor without Wi-Fi?
Not without any network. Both phones need Wi-Fi or mobile data, but they do not need to share the same Wi-Fi.
Can I use my phone as a baby monitor for free?
With Vakur the parent phone is always free and the baby phone is free for 48 hours, so you can test it at home first. After that the baby phone is unlocked with one single purchase – no subscription.
Try Vakur on your own phones
Two phones, iPhone or Android in any combination. The parent phone is always free, the baby phone is free for 48 hours, then one single purchase – no subscription.
More guides
- Using an old phone as a baby monitorYour old phone can become the baby phone. A short checklist on system version, battery, storage and settings before you put it in the nursery.
- Baby monitor app vs regular baby monitor: which one suits youShould you use an app on two phones or buy a dedicated baby monitor? An honest comparison of setup, reliability, privacy, travel and cost.
- Baby monitor app without Wi-Fi: what you need to knowDoes a baby monitor app need Wi-Fi? It needs a connection, but not the same Wi-Fi. How different networks and mobile data work, and what to check.
- Baby monitor app keeps disconnecting: causes and fixesWhen a phone baby monitor keeps losing its connection, the cause is usually power saving, Wi-Fi or a closed app. Step-by-step checks that help.
- A baby monitor for travel: your phones are enoughTake your baby monitor on holiday without extra gear: how to use two phones in a hotel, a holiday rental or at the grandparents’ house.
